It’s a prevalent question in any repair shop. Let’s look at the pros and also cons prior to you drill that hole...

You watching: Guitar strap pin

Okay, you’ve already put one strap button on the tail end of the guitar. At the neck end, tbelow are around 5 options:


Position #1

This place is a well-known spot: on the ago close to the heel cap, favor on a Gibson semi-hollowbody.

Position #2

Some folks location it best on the heel cap itself. Strap butloads in these spots 1 and also 2 feel organic to electric players, yet they allow the guitar to reminder forward while playing. Also, when the guitar goes in the instance, its weight will rest on the switch, so I’d desire deeply pincluded plush to support it in the case.

Position #3

I like position #3 on the guitar’s side close to the neck heel, because the guitar hangs comfortably, balances well, and also doesn’t loss forward. And the strap’s out of the way of your fretting hand also. If the neck block is wide sufficient, all you carry out is drill a hole and also screw on the switch. I install it centered on the side, about 5/8" out from the heel.

When the neck block"s not wide enough, I glue a reinforcement block inside, wbelow the side and neck block meet.

Carecompletely drill the hole through the side as presented through my see-through demo guitar. Then put glue on the block and also use the switch screw itself as a clamp while it dries. I usage Franklin"s Titebond for this form of task because it"s solid and cleanup is straightforward.

See more: Best Semi Hollow Body Guitar Under 1000, 5 Best Semi


Modern acoustics frequently have lag bolts fastening the neck to the body, so examine inside before drilling to make certain you’re not going to hit steel hardware.


Position #4

This is additionally good, best on the heel of the neck itself. What around tying the strap to the peghead? Don’t execute it. You don’t want that sort of strain pulling at the neck that you’ve so nicely changed the action on.

Position #5

This is the a lot of well-known alternative among my customers. With the strap wrapping down under the heel, you"ll choose the way it pulls the guitar towards you. Surprisingly enough, it isn’t a lot in the way of your fretting hand also either.

For a heel mount, usage a strap switch felt washer to stop blistering the finish wbelow the level strap button meets the curve of the heel.

See more: The Best Cheap Ukulele Reviews 2021 (Best Budget Ukuleles), The 7 Best Cheap Ukuleles 2021


Use the appropriate drill size

The little bit need to be comfortably larger than the core of the screw, leaving simply the tips of the threads to reduced into the timber. Use this photo as a guide: this is’s strap button little bit and also tap set. The little bit and tap are presented overlapped in the middle, mirroring exactly how your drill dimension should relate to the screw. This drill and also tap set is what I usage, so I do not have to hunt or guess at sizing. It"s an excellent fit for all of these strap buttons: the Gripper, a traditional switch, the Lockstrap System, Dunlop’s Straplok, and also a pretty snakehardwood switch.


Here"s a trick that I learned from a customer — installing a strap button on the neck plate of a bolt-on guitar!

Categories: Review